MG-SA Blow Moulding MachinesMulti-cavity manual blow molding machine
Brief Introduction
SA series blow moulding machine is the latest high output semi-automaitc PET blow moulding machine. Comparing to the traditional machine design, thanks to new concept of automatic bottle discharging unit, the special heating system and the preforms automatic loading design, The SA series blow molding machine requires less manpower and reducing the work intension for the operator. New SA series blow moulding machine holds the cavity of the blowing mold up to 6 cavities, the output reaches 2800BPH for 500ml water bottles. Compared to the output of normal manual blow moulding machine, this is an outstanding improvement in the PET Bottle blow molding industry.
Bottle Samples PET bottles produced by PET blow moulding machines:
Specification
General Information | MG-SA4 | MG-SA6 | MG-SA4 C TYPE |
---|---|---|---|
Materia | PET | PET | PET |
Clamping Force | 300KN | 300KN | 300KN |
Clamping Stroke | 320mm | 250mm | 230mm |
Max.Stretching Stroke | 340mm | 340mm | 340mm |
Number of Cavities | 4 Cavity | 6 Cavity | 4 Cavity |
Theoretical Output | 2000BPH | 2800BPH | 1800BPH |
Max.Mould Thickness | 210mm | 190mm | 300mm |
Space Between Tie Bars | 570x400mm | 570x400mm | 440x440mm |
Electrical System | |||
Voltage Standard | 380v/3PH/50Hz | or special order | 380v/3PH/50Hz |
Number of Heating Zone | 18KW | 18KW | 4 Sections |
Container | |||
Max.Container Volume | 0.1-2.5L | 0.1-1.0L | 0.1-1.5L(4 Cav) 5L(2Cav) |
Neck Diameter Range | 25-38mm | 25-38mm | 25-45mm |
Max.Container Diameter | 110mm | 70mm | 110mm |
Max.Container Height | 370mm | 250mm | 400mm |
Auxiliary | |||
Low Air compresso | 8-10Bar | 8-10Bar | 8-10Bar |
High Air compressor | 30Bar | 30Bar | 30Bar |
Dimension&Weight(L XW XH) | |||
Blow molding machine | 190x88x180cm | 190x88x180cm | 165 X78 X218cm |
Oven | 190x66x160cm | 190x88x180cm | 172 X70 X148cm |
Net Weight | 1.3T | 1.3T | 1Ton |
Mega Machinery, the Professional blow moulding machine supplier in China.
Note: Multiple cavity blow moulding machine is also known as bottle blowing machines, Stretch blow molding machines, bottle making machine, blowing machine and PET blow molding machine.