MG-HR Heat resistance stretch blow molding machine For Hot fill PET bottles
Brief Introduction
MG-HR Heat resistance stretch blow moulding machine is specially designed to produce PET bottle with high heat resistance for hot filling package such as juice and tea. It adopts multiple blowing to reduce the residual stress, as result; The PET bottle has no any shrinkage during hot filling. The PET bottles produced by MG-HR Stretch blow moulding machine can stand temperature over 100℃ depending on the type of PET material with different crystallization rate. With high strength, good transparency and low production costs, MG-HR plays a big role in hot fillable PET bottle packaging market.
Bottle SamplesFollows are some containers produced by MG-HR.
Specification
General Information | MG-HR1500 | MG-HR2500 | MG-HR3500 |
---|---|---|---|
Clamping Fource | 30T | 40T | 50T |
Clamping Stroke | 150mm | 150mm | 150mm |
Max. Stretching Stroke | 370mm | 370mm | 370mm |
Bottom Moving Stroke | 70mm | 70mm | 70mm |
Number of Cavities | 2Cavity | 4 Cavity | 6Cavity |
Theoretical Output | 1000BPH | 2000BPH | 3500BPH |
Max. Mould Thickness | 300mm | 300mm | 300mm |
Space Between Tie Bars | 400*380mm | 640*380mm | 880*700mm |
Electrical System | |||
---|---|---|---|
Voltage Standard | 380v/3PH/50HZ | or special order | |
Number of Heating Zone | 2Sections | 4 Sections | 6 Sections |
Total Power(Full Loaded) | 28KW | 60KW | 70KW |
Container | |||
---|---|---|---|
Max. CONTAINER Volume | 2.5L | 2.5L | 2.5L |
Neck Diameter Range | 32mm | 32mm | 32mm |
Max. Container Diameter | 35-100mm | 35-100mm | 35-100mm |
Max. Container Height | 400mm | 400mm | 400mm |
Auxiliary System | |||
---|---|---|---|
Low Air compressor | 8-10Bar | 8-10Bar | 8-10Bar |
High Air compressor | 30Bar | 30Bar | 30Bar |
Air Dryer | 3.0/30 | 3.0/30 | 3.0/30 |
Dimension & Weight (L*W*H) | |||
---|---|---|---|
Blow molding machine | 280*180*220mm | 320*250*230mm | 550*210*230mm |
Preform Autoloader | 150*120*250mm | 150*120*250mm | 230*200*230mm |
Net Weight | 4.5Ton | 8Ton | 10Ton |
Mega Machinery, PET Heat resistance stretch blow moulding machine supplier in China.
Note: PET Blow molding machine for hot filling PET bottles is also known as PET Heat resistance stretch blow moulding machine, Stretch blow molding machines for heat set bottles.